Hustler- FASTEST OF THE
FAST
Super Z - SZ30KOH60XR7
$9499.99
(MSRP  $11999.99)
MODEL #928044B
BUY
YOURS
TODAY!!
CALL NOW

1-877-580-
SNOW
$9599.99
BEST PRICE IN THE STATES!

    Specifications

Engine Kohler
Horsepower 30 hp
# of Cylinders 2
Displacement 750 cc
Compression Ratio 9.4 : 1
Deck Size 60 in
Maximum Torque 47.1 ft lbs @ 2600 rpm
Starter 12 volt
Ignition Electronic
Charging System 12 volt, 15 amp
Fuel Filter Replaceable, automotive style
Air Cleaner Heavy duty
Cooling Air Cooled, Fly Wheel fan
Governor Mechanical
Blade Tip Speed 18,400 fpm
Cutting Height 1.5-4.5 " (.25 increments)
Hydrostatic Drive V-Belt
Ground Speed Infinitely Variable 0-15 mph fwd, 0-7.5
mph Rev
Tires 13 x 6.5-6 rib tread, 24 x 12-12 turf tread
Fuel Capacity 14.4 us gal
Hydraulic Oil Capacity 2 gal
Seat Suspension Molded Vinyl w/ armrests
Flex Forks Optional for $229.99
Cup Holder : 2 for various size cups
Dimensions 78.80" L x 61"W x 39" H
Tire to Tire Width 51 in
Weight Approx.1212 lbs (549.75 kgs)


BACK TO HUSTLER PAGE
MODEL FEATURES
Type Dual hydrostatic. Individual pumps power two direct-drive
wheel
motors. Hydrostatic system operates on 10W40 motor oil. Super Z
features transmission drive (oil) cooler for increased system life.
Pumps Two variable displacement, axial-piston type. Each pump
powers one drive-wheel motor.
Pump Drive V-belt drive from engine crankshaft
Hydraulic Lines Stainless-steel, high-pressure lines with Parker
Seal-Lok™ O-Ring Face-Seal fittings, Hydraulic lines
and fittings guaranteed to never leak!
Construction: Mainframe is 1.5 in x 3 in x .187 in (3.8 cm x 7.62
cm x .47 cm) rectangular steel tubing with internal gusset in frame
bend
Drive motors mounted to .179 in (.45 cm) welded steel. Front
caster wheels mounted with roller bearings on each
wheel. Front caster forks are .5 in (1.27 cm) steel
Deck Lift: Foot-operated deck height adjustment. Pin for setting
height, detent for transport position
Controls: Hand-operated choke/throttle, ignition switch, electric
mower clutch. Integrated parking brakes
Indicators: Hour meter, engine warning light
Cup Holder: Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size including Big
Gulp™
Deck Type Free-floating mower using three blades with center
blade to the
front. Mower is suspended at the corners. Includes 6 deck-
mounted rollers
to improve flotation in rolling and uneven terrain.
Deck Lift Raise and lower deck from driver’s seat with simple
footoperated deck height adjustment. Pin for setting
height, transport position. Change cutting heights, hop curbs and
trailer more easily.
Construction 7 gauge deck plate with an 11-gauge deck plate
doubler
with 7-gauge triplers at each spindle mount (nearly 1/2-in thick!)
Solid 1-1/2 in x 1/2 in flat steel flat bars reinforce impact
areas on trim edges. 7-gauge reinforced front edge. Lifetime
warranty on leading edge of deck.
Steel deck housing is 5.80 in (10.16 cm) deep to provide room for
high capacity mowing. Molded rubber discharge chute.
Cutting Heights Foot-operated deck height adjustment. Pin for
setting height, detent for transport position. Height
adjustment in .25 in increments from 1 in to 5 in (2.55 cm to 12.7
cm).
Blade Drive V-belt drive to all three spindles. Spring tension idler
pulley.
Spindles Machine ductile housing, 1 in (2.5 cm) diameter high
carbon
steel shafts and sealed ball bearings. 3-year warranty on spindle
bearings.
Flotation Suspended mower floats on four spring-assisted chains.
6 antiscalp wheels are standard.
Discharge Chute Molded rubber. Over-center design allows for
chute to be folded up for improved trailering or to pass
thru gates, etc.
TOUGHEST, FASTEST, BEST CUT QUALITY IN THE INDUSTRY

THIS IS A PIECE OF EQUIPMENT YOU CAN MAKE MONEY WITH